中文简体
EnglishAnti-Skid Safety Powder Coating
Industrial-grade protective coating solutions: environmentally friendly, durable, and cost-effective.
Intro to Anti-Skid Safety Powder Coating
Anti-Skid Safety Powder Coatings are robust finishes specifically engineered to maximize the coefficient of friction (COF) on walking surfaces, steps, and ramps. Unlike simple textured powders, anti-skid systems incorporate hard, abrasive particles (such as specialized mineral fillers or aggregates) within the polymer matrix. This creates a highly rough, non-slip surface necessary for industrial safety compliance, preventing slip-and-fall incidents in wet, oily, or high-traffic environments, and improving adherence to OSHA and ADA standards for walkways.
Abrasive Aggregates and Safety Compliance
The anti-skid function is achieved by strategically blending uniformly sized, highly durable aggregate particles into the powder formulation. The degree of anti-skid property is controlled by the size and concentration of the aggregate and the final film thickness. During curing, the polymer encapsulates the base of the aggregate particles while leaving the top surface exposed, creating a tenacious, high-COF surface. These coatings must be exceptionally durable to resist the abrasion of foot traffic and equipment, as a worn-down surface quickly loses its safety function. Testing involves measuring the COF using specialized slip-resistance meters (e.g., pendulum or drag-sled methods), with results often required to exceed regulatory minimums (e.g., Static COF >0.6). Anti-skid powder coatings are essential for industrial safety, combining corrosion protection with a critical safety feature that lasts the coating's lifetime.
Specifications
| Property | Standard Anti-Skid Value |
| Primary Mechanism | Exposed Hard Abrasive Aggregate |
| Coefficient of Friction (COF) | High (Typically ≥0.6 Static COF dry/wet) |
| Aggregate Material | Aluminum Oxide, Silicon Carbide, or specialized mineral |
| Abrasion Resistance | Exceptional (Must withstand foot traffic) |
| Film Thickness (Typical) | 100 to 250 microns (Needed to encapsulate aggregate) |
| Cleaning | More challenging (Requires high-pressure/brushing) |
| OSHA/ADA Compliance | Meets safety standards for walking surfaces |
| Base Chemistry Options | Epoxy (Interior) or Polyester (Exterior) |
Application Fields
- Industrial Platforms and Walkways: Areas exposed to grease, oil, or water in factories.
- Ramps and Stairs: Access points requiring mandatory slip prevention in wet conditions.
- Machine Footings and Floor Areas: Zones around heavy equipment where spills are common.
- Utility Vehicle Running Boards: Steps and access points on trucks and machinery.
- Marine Docks and Gangways: Exterior areas in contact with water and moisture.
Key Characteristicss
- Mandatory Safety Feature: Creates a high-friction surface to prevent slips and falls.
- Customizable COF: Slip resistance can be tailored by adjusting aggregate size and concentration.
- Extreme Durability: The combination of hard aggregate and tough polymer resists heavy abrasion.
- Corrosion and Chemical Protection: Provides excellent defense against industrial fluids and cleaners.
- Compliance Solution: Helps facilities meet crucial workplace safety regulations (OSHA, ADA).
Comparison: Anti-Skid vs. Standard Texture
| Feature | Anti-Skid Safety Powder | Standard Texture Powder |
| Primary Mechanism | Hard, exposed abrasive aggregate | Polymer flow differential (no hard aggregate) |
| COF Level | Very High (Safety rated) | Moderate (Aesthetic/Defect Hiding) |
| Abrasion Resistance | Exceptional (Designed for traffic) | Good |
| Film Thickness | High (Necessary for aggregate embedment) | Standard/Moderate |
| Cost | Premium (High-cost aggregate) | Standard for textures |
Why choose us
Customization: We have a strong R&D team,and we can develop and produce products according to different requirement of customers.
Cost: We have our own raw material production center.So we can offer the most favourable price and good-quality products directly.
Quality: We have our own testing lab and the most advanced and complete inspection equipment, which can ensure the quality of our products.
Capacity: Our annual production capacity is over 30000 tons, we can meet the needs of different customers with diverse purchase quantity.
Service: We focus on developing high-quality products for top-end markets. Our products are in line with international standards, and are mainly exported to Europe, America, Southeast Asia, South America and other destinations around the world.
Shipment: We are only 200 kilometers away from the Shanghai Port and 230 kilometers to Ningbo port, it is very convenient and efficient to ship goods to any other countries.
Customization
Quality
Capacity
Service
Shipment
Frequently Asked Questions (FAQs)
- Q: Can anti-skid powder be applied to create a low-texture finish?
- A: No. The nature of incorporating large, hard aggregates means the finish will always be visibly rough. A less aggressive anti-skid can be achieved by using finer aggregate, but it will not be a smooth or fine texture finish.
- Q: What is the lifespan of the anti-skid feature?
- A: The lifespan is excellent, as the hard mineral aggregates are much more durable than the polymer itself. The anti-skid property will last until the heavy traffic completely wears down the aggregate particles, which typically takes many years.
- Q: Does the COF vary with the base chemistry (Epoxy vs. Polyester)?
- A: The COF is primarily determined by the physical aggregate. The base chemistry (Epoxy for chemical resistance, Polyester for UV stability) dictates the durability and environmental suitability of the coating itself.
Selection Guide: Anti-Skid Safety
Select Anti-Skid Safety Powder Coating when:
- The surface is a walkway, step, or ramp where slip hazards are a critical safety concern.
- The area is subject to oil, water, grease, or high-volume foot traffic.
- The application must comply with specific governmental or industry safety standards (e.g., OSHA, ADA).
- A high-durability, long-lasting high-COF surface is required to minimize maintenance cycles.
- The coating must be formulated in a UV-stable base (Polyester) for exterior use or a chemical-resistant base (Epoxy) for industrial interiors.
